GALLERY
Team & People Templates
From launching a new team to day-to-day operations, discussions and role assignments happen right on the board.
There are templates for both sides of joining a team: the manager welcoming someone new, and the person who just started. Running 1:1s and meetings, managing hiring and shifts, or getting AI use started at work — pick by your role and what you're stuck on right now.
68 items
How to Design a Workshop for Beginners | Set the aim, plan diverge and converge time, share prep
Plan a 2-hour workshop: set the aim, split diverge and converge time, and assign prep roles. Built for an internal session of up to 10 people and 2 hours. Keep the time for widening ideas apart from the time for choosing: split the day into four blocks (open, diverge, converge, share), list activity candidates for each, vote on fit with the aim and ease of running, and fit the timetable into 120 minutes. Then set the path to the day, the roles, and who preps what by when, so you do not run short of time or materials on the day. Only the planners write on the board, in a group of 2 or 3. Allow 60-90 minutes per planning meeting, and about two weeks with prep and rehearsal. Handouts and tools go in the candidates table. The whiteboard has 4 pages: aim and flow, activity candidates, timetable, and prep roles. The task board has 5 columns (not started, building, preparing, rehearsed, done) with 4 parent tasks and 12 subtasks.
Work Efficiency for Beginners: Team Pain-Point Audit Board | Muri, Muda, Mura and First 3 Fixes
Team work-efficiency audit: list pain points as muri, muda and mura, then pick 3 fixes. It helps a team choose the first 3 fixes. It sorts pain points into four fixes: eliminate, combine, change tools or review the steps. First you count each person's routine work as times per month × minutes each, so you compare by monthly hours. Then you choose by three criteria (hours saved, people affected, can start next month) and 3 dot votes each. Steps to rework go through ECRS (eliminate, combine, rearrange, simplify). Best for 4 to 7 people in two 60-minute sessions at the start of a quarter: pages 1-2 in the first, pages 3-4 (owners, deadlines, how to announce) in the second. Try the 3 chosen fixes for a month, then meet for 30 minutes to compare with the numbers you measured beforehand and decide to keep, change or stop. The whiteboard has 4 A4 pages (count, list, choose, test). The task board has 5 columns and 4 parent tasks with 3 subtasks each, 16 in all.
Tuckman Model for Beginners: Team Stage Check | Everyone Places a Piece and Picks Next Actions
A Tuckman model team check: everyone places a piece on one of 5 stages, then picks 1–2 actions. The five stages are forming, storming, norming, performing and adjourning. Write the events since launch, place one stamp per person on the closest stage and say why. Where pieces scatter, list the troubles, compare actions on two questions (can we do it now, does everyone agree) and vote with circle stamps. Bruce W. Tuckman set out the model in 1965; adjourning was added in 1977. A stage is not a score, so never rate people with it. Suits 4–8 people, 30–45 minutes after a regular meeting, in a team 1–3 months old. Set the project visibility to "Unlisted" and choose this team so only members see the board, making it easier to explain your pieces. Place the pieces again after 30 days. The whiteboard has four A4 pages (current state, pieces, actions, review) with a spot for last time's result. The task board has 5 columns, 4 parent tasks and 12 subtasks.
Retrospective Method Picker for Beginners | When KPT Gets Stale, Compare 8 Methods and Pick 1
When KPT gets stale, match your team's pain points to 8 retrospective methods. Vote on one to try next. Write pain points on sticky notes, check them against eight methods such as 4Ls, Starfish, and Start Stop Continue, and vote on one. First copy your current session flow and the last three Keep, Problem, and Try. Mark each method ○, △, or × in the comparison table, plot the ○ methods on two axes (feelings or improvements, 30 or 60 minutes), cut to 3 with 3 votes per person, and compare pros and cons. You also note why you passed on the others. Each method gets one table line, so the board is for choosing, not memorizing. Plan on a facilitator plus 2 or 3 members and about 60 minutes. Try the pick three times, then use the signals to decide whether to continue. Four A4 pages: write out your session, line up pain points and methods, pick one, and review after three tries. The task board has 5 columns (Not started to Reviewed) with 4 parent tasks and 12 subtasks.
Peer Introduction Pair Interview for Beginners | Interview a partner, introduce them in 30 seconds
Peer introduction icebreaker: interview a partner, then introduce them in 30 seconds. A facilitator shows the question cards and keeps time, and the session leaves everyone's surprising side, what the team can lean on, and a first request. Pairs interview each other for 5 minutes each, pick stories by three criteria (surprising, useful at work, fine to share), and read three sentences: name and job, a surprising side, and what to ask them for. Strengths people are shy about come across in the listener's words, so it suits new team kickoffs and start-of-year meetings. Plan for 4 to 10 people and about 30 minutes: 3 for pairs and listening rules, 10 for interviews, 5 for writing, 30 seconds per introduction, and 5 for the list and first request. With an odd number, form one trio. The whiteboard has 4 pages: set pairs, listen, polish the introduction, and start relying on each other. The task board has 5 columns, 4 parent tasks, and 12 subtasks.
Marshmallow Challenge Training for Beginners | Team Plans, Results and Round 2 on One Board
Marshmallow Challenge training for two teams: plans, round 1, review and round 2. Use it to turn what you change in round 2 into one thing to try at work. Write rules and a height guess, plan and build, review round 1 (what we did, learned, will do next), vote on one change and test it in round 2. Bring materials and a clock yourself, as the board keeps only what teams write. The facilitator times the build and measures height, and each team picks a timekeeper. Unlike stopping after round 1, you compare height, prototypes and role movement across both rounds in one table, so teams can discuss which change moved the result. Fits 8 to 10 people (two teams of 4 to 5) in about 60 to 90 minutes. The whiteboard has four A4 pages: aim and teams, plan and build, choose a change, apply at work. The task board has five columns (Prepare, Round 1, Review, Round 2, Try at work) and 4 parent tasks with 3 subtasks each, 16 in all.
Employee Journey Map for Beginners | See a New Hire's First 6 Months and Fix the Low Points
Employee journey map: chart a new hire's first six months and fix onboarding where mood dips. It follows one person across six stages, from application to month six, in five rows: actions, people and tools, mood, problems, and the team's response. Pick one recent leaver or new hire, gather material, mark the mood dips, compare them on pain and speed of fix, and vote with three votes each. Then split each chosen fix into a first step with an owner, a due date, and a day to check with the next hire. It resembles a customer journey map, but it follows a new colleague and fixes how you welcome people. Best for a workplace of about ten, with two to four people such as hiring and team leads. Plan 60 to 90 minutes to discuss once the material is gathered. Four A4 pages: choose the person and stages, map six months, choose what to fix, fix onboarding. The task board has five columns and four parent tasks, one per page, with three subtasks each.
How to Run a Consensus Game for Beginners: Rank Alone, Agree as a Team, Compare with a Reference
How to run a consensus game: rank alone, agree as a team, then compare with a reference. Plan on 5-8 people and 60 minutes; you leave with a way to decide without a majority vote and one idea for your next meeting. Rank six items whose answer shows in workplace records, such as last month's busiest counter errands. The facilitator builds the reference ranking from the records and does not rank. It is a yardstick, not a single right answer. Add the rank gaps by hand: a team gap below the individual ones means talking helped. Unlike a vote or an average, the team ranking is set by talking through reasons until everyone accepts it. Each person may circle up to two ranks they cannot accept, and you talk until the circles are gone. Time: 10 min to explain, 10 alone, 25 as a team, 15 to reflect. The whiteboard has 4 pages: topic and rules, rank alone, agree as a team, try at a meeting. The task board has 5 columns, 4 parent tasks matching the pages, and 12 subtasks.
Common-Ground Icebreaker for Beginners | Find surprising things in common and plan a meetup
Common-ground icebreaker: small groups find surprising matches and plan a first meetup. Groups pick a surprising match and dig into why. Five to 10 people meeting for the first time split into two or three groups and take turns answering prompts. Any answer that two or more share goes in the table. Look for a surprising match you can explain by asking why, not an obvious one like "same hometown"; it beats round-robin introductions. Say "pass" to skip a prompt. Plan on two or three groups, ten people at most, and about 60 minutes: 10 for prompts and groups, 20 to write answers, 15 to vote and dig in, 15 to plan the meetup. At 30 seconds each, a group of four covers six prompts in 20 minutes. Works online or in person. Name a facilitator and one writer per group. The whiteboard has four pages: set up, write shared answers, vote on a surprising one, plan a small meetup. The task board has five columns and four parent tasks, one per page, with three subtasks each.
Team Password Manager and MFA Rollout: Retire Shared Passwords, Plan Exceptions and Backups
Take shared passwords out of spreadsheets and chat and roll out a password manager and multi-factor authentication (MFA) to the whole team in weekly stages. The end state is that everyone signs in with an authenticator app or passkey, and every remaining exception sits in a table with a reason and a deadline. Start with a few people, then widen to office, field, and contractor staff week by week. SMS codes are weaker than authenticator apps and passkeys, so treat them as a stopgap with a deadline. Traps to check include stalling on SMS, exceptions that bring shared passwords back, support requests landing on one day, and a single password manager admin. Not sure where to begin? Copy only the service names and users from the sheet or chat that holds shared passwords, never the passwords. The whiteboard has 4 pages. The task board has four columns - not started, preparing, switching over, and verify it sticks - with 4 parent tasks and 12 subtasks.
Security Policy Framework: Three Layers Staff Can Follow, With a Review Cycle and Exceptions
Split your information security policy into three layers - policy, standards, and procedures - and set each document's owner, approver, review cycle, and exception flow. It suits stale or unread policies. Inventory documents by revision, owner, and readership; keep the policy short, standards company-wide, procedures in staff's words and screens. Map standards to NIST CSF 2.0 functions (Govern, Identify, Protect, Detect, Respond, Recover) to find gaps; verify them in NIST's latest docs. Rank items by feasibility and risk, cut or support unfollowable rules, and set who may accept which exceptions. Owners and an exception contact curb misfit copied rules, rules nobody keeps, quiet rule-breaking over tedious requests, and revisions that never reach staff. Examples change passwords only after a leak or concern and rank SMS below authenticator apps and passkeys. The 4-page whiteboard ends in a yearly PDCA review; the task board has 5 columns, 4 parent and 12 subtasks.
Remote Work Security Checkup for Beginners: Set Home Wi-Fi, Screen, Device, and Call Rules
Remote work security tends to fail in small moments, like working on a shared family PC, opening company files on free cafe Wi-Fi without the company VPN, or leaving a screen unlocked. This template helps you review each place your team works and set company rules, with a contact for exceptions. You check five areas (home Wi-Fi, workspace, devices, documents, and conversations) by looking at router and PC settings and where paper is kept and thrown away. Overheard meetings and printed pages in household trash are written up as what happens, how to check, and how to prevent it. Findings are ranked by likelihood and impact, each rule gets a reason and a contact, and after one month you review with KPT (Keep, Problem, Try). It works for teams starting remote work and for teams revising rules they already have. The whiteboard has 4 pages, from confirming where people work to trying and reviewing the rules. The task board has 4 columns, 4 parent tasks, and 12 subtasks.
How to Choose a Team or HR Template
Team and HR templates are easiest to pick by who uses them. A manager, a recruiter, someone building shift schedules, and someone rolling out AI at work each need a different board. The sections below mostly cover people leading a team; boards for someone who just joined show up in the FAQ.
Welcoming Someone and Handing Off Work
Managers and mentors bringing on a new hire can use "Employee Onboarding", which sets the day-by-day plan for week one and what to cover in the 30-, 60-, and 90-day check-ins ahead of time. Whoever is leaving a role and whoever is taking it over can use "Job Handover Checklist", which orders tasks by frequency and how much only one person knows, and tracks five columns from writing procedure docs through the successor working solo.
Running 1:1s and Meetings
A manager starting biweekly or monthly check-ins can use "1:1 Meeting Toolkit" to set the purpose, ground rules, a 30-minute structure, and how to sort discussion topics before the first session. Someone newly running the agenda and notes for online meetings can follow "Online Meeting Manners and Flow" from five minutes before the start to 30 minutes after the end, including sending the notes out the same day. Whoever is organizing a team event can use "Team Building Workshop", which includes a 90-minute run of show and a shared-understanding worksheet.
Managing Hiring and Shifts
Recruiters and interviewers can use "Hiring Pipeline Tracker", which lists what to do at each screening stage alongside a criteria-by-candidate table so everyone is judged on the same scale. Whoever builds the schedule for a shift-based team can use "Shift Scheduling Board", setting required headcount by day and time slot before moving through five monthly steps: collect requests, draft, adjust, finalize, and record.
Getting Started with AI at Work
A workplace with no rules yet for generative AI can start with "AI Usage Rules Board for Beginners", which fits allowed tasks, data you must never enter, a check-before-you-send step, and who to ask onto a single page. Whoever wants to give coworkers actual hands-on time can use "AI Hands-On Session Planning Board for Beginners", which structures a 30-minute session in five steps and prepares answers to common objections.
Frequently Asked Questions
How do templates for new hires differ from ones for the people welcoming them?
They're built for different roles. "Employee Onboarding" is used by the manager and mentor on the receiving end, starting before the new hire's first day. Someone who just joined and wants a board of their own can use "Workplace People Map" instead, to sort out who to ask about what.
Where do I start writing a handover document?
Start by defining what "done" looks like for the handover. "Job Handover Checklist" then has you rank tasks by frequency and how much only you know, write procedure docs for the highest-priority ones first, and finish once the successor has run the task solo and any questions have been folded back into the docs.
What should I prepare first for a team-building workshop?
Start by writing the session's goal in one sentence. "Team Building Workshop" then has you plot activity ideas on two axes — how much prep they need and how much they build connection — and narrow it down to one or two. Booking a venue and supplies goes more smoothly once the goal is locked in.
Can I view the 1:1 and handover templates without signing up?
Yes. Field names, columns, and task order for the 1:1 and handover boards are all viewable on the public page without an account, so you can compare before choosing. To fill one in for your own use, register for free and copy it from the marketplace.